canon mv800 camcorder manual

canon mv800 camcorder manual

Mini DigitalPlease read this manualPage 4 Table of contentsPage 7 Components GuideTerminal cover DV terminal ( 68). Stereo microphone Tripod socket ( 27). AV terminal ( 31)Connect to a household power source to use the camcorder without worrying about theUse only videocassettes marked with the logo.Adjusting the Viewfinder (Dioptric Adjustment) EPage 16 Attaching the Shoulder StrapRotating the LCD Screen E. Open the LCD panel 90 degrees. Page 18 Setting the Time Zone, Date and TimePage 21 Recording Movies on a Tape. RecordingPage 22 ? About the LCD and viewfinder screen: The screens are produced withThe camcorder is equipped with optical zoom and digital zoom.Holding the Camcorder. For maximum stability, grip the camcorder in your right hand and keep. Page 28 Playing Back a TapePage 29 Special Playback ModesPage 30 Adjusting the VolumeTVs with SCART Terminal E. Refer also to the TV or VCR instruction manual.You can select the output channels when playing back a tape with audio recorded on. Page 34 Advanced FunctionsPage 35 Menu and Default Settings. Default settings are shown in boldface.Page 36 Submenu Menu Item Setting OptionsD.EFFECT SETUP D.E.SELECT, FADER,. Page 38 Submenu Menu Item Setting OptionsRecordingThe camcorder adjusts focus, exposure and other settingsPage 40 Program selectorPage 43 Skin Detail Function. When shooting close-ups of people, the camcorder automatically softens details toPage 44 Adjusting the AE ShiftAutofocus may not work well on the following subjects. In such case, focus manually.You can use the preset modes to reproduce colors more accurately, or set a custom white. Page 48 ? Use the auto setting for normal outdoor scenes.Page 49 Setting the Shutter Speed. You can adjust the shutter speed manually to make stable shots of fast moving subjects. Select. Page 50 Auto Slow ShutterLP extends the. Page 53 Audio Recording. Changing the Audio Mode E. You can record sound in two audio modes—16-bit and 12-bit. The 12-bit mode.http://www.altesso.ma/stock/canon-digital-video-camcorder-zr80-manual.xml

• canon mv800 camcorder manual, canon mv800 camcorder manual download, canon mv800 camcorder manual pdf, canon mv800 camcorder manual free, canon mv800 camcorder manual 2017.

Page 54 Using Digital EffectsAdd flavor to your recordings. Art (ART) Black and White Sepia (SEPIA)Page 56 Selecting a FaderYou can operate the multi-image screen only in the following playback modes:Playback. The playback image can be magnified up to 5 times.Page 62 End SearchPage 63 Playing Back a Tape with Added. SoundPage 65 Changing the Display Language. The language used for screen display and menu items can be changed. The available setThe image stabilizer compensates for camcorder shake even at full telephoto. It tries toPage 69 ? When connecting a VCR, the quality of the edited tape will be slightly lower thanPage 70 Recording from Analog VideoPage 71 Recording from Digital Video. Devices (DV Dubbing)Signals (Analog-Digital Converter)Page 74 ? Depending on the signal sent from the connected device, the conversion fromPage 75 Transferring Video Recordings to a. ComputerYou can transfer recordings to a computer equipped. Page 76 Additional InformationCAMERA Mode (see also 23)Camcorder Handling Precautions EPage 81 Battery Pack Handling PrecautionsPower Sources. You can use the compact power adapter to operate the camcorder and to charge. Page 84 TroubleshootingConsult your dealer or aImage will not appear on the Camcorder is not set to Set the camcorder to 21. Page 86 PlaybackPage 87 System Diagram (Availability differs from area to area)WD-28 MiniDV. Page 88 Optional AccessoriesPage 89 TL-28 Tele-converter. This Tele-converter lens increases the focalPower consumption 17W. Rated output 8.4 V. Page 92 IndexRecord review................. Page 94 CANON INC. Canon Europa N.V. P.O. Box 2262, 1180 EG Amstelveen, the Netherlands. Canon UK Ltd. CCI Service Centre, Unit. They have stuck to the maxim that technology is only worth having when it is both simple and useful. Functionality that simplifies the key task of shooting great video has been enhanced. Easy mode This approach has produced a camcorder that sets a standard for uncomplicated performance.http://extremebootcamptustinranch.com/userfiles/canon-digital-rebel-xti-user-manual.xml

Everywhere ease of use is paramount. Menu navigation is intuitive and straightforward. Controls are positioned for instant, fingertip access to key functions. Within seconds of picking it up for the first time you can be capturing quality footage.And it’s as easy to use as the Easy mode. Simply push the button and the camcorder is ready to capture true widescreen images, using the full width of the CCD sensor It may be small, but its 2.4” colour LCD monitor gives you plenty of screen space to keep your eye on detail as you record. What’s more, screen brightness is adjustable to aid visibility in outdoor locations. The MV800 has a powerful 20x optical zoom, with exceptional contrast and clarity, and that can place you right at the heart of the action. Canon’s unique DiGIC DV processor renders these in warm, subtle tones; colours appear natural and vibrant. Electronic Image Stabilisation (EIS) means that hand-held footage remains steady and calm even in tricky shooting situations. But, I can played my recorded cassette tapes on my camera. I am using Canon MV 800i. What should I do. E Change the display language before you begin ( 65). Symbols and References Used in This Manual: Precautions related to the camcorder operation.: Additional topics that complement the basic operating procedures.: Reference page number.CHARGE indicator 2. Plug the power cord into a power DC IN terminal outlet. 3. Connect the power adapter to the camcorder’s DC IN terminal.You can keep the battery pack attached; the battery power will not be E consumed. 1. Turn the POWER switch to OFF. 2. Connect the power cord to the power adapter. 3. Plug the power cord into a power outlet. 4. Connect the power adapter to the camcorder’s DC IN terminal. Turn off the camcorder before connecting or disconnecting the poAttaching the Lens Cap 1. Attach the cord to the lens cap. 2. Pass the grip belt through the loop on the cord.

Hook the lens cap on the grip belt while you are recording, anThis is useful for outdoor recordings. Press the LCD BACKLIGHT button. This setting does not affect the brightness of the recording or theThe time zone setting appears (see table on the next page). The dE 16 1 4 20 19 2 18 24 3 17 6 7 9 10 15 8 5 21 23 14 12 22 11 13 14 15 16 17 18 19 20 21 22 23 24 1 2 3 4 5 6 7 8 9 10 11 12 13 No. Time zone No. Time zone 1 LONDON 13 WELLGTN (Wellington) 2 PARIS 14 SAMOA 3 CAIRO 15 HONOLU. (Honolulu) 4 MOSCOW 16 ANCHOR. (Anchorage) 5 DUBAI 17 L.A. (Los Angeles) 6 KARACHI 18 DENVER 7 DACCA 19 CHICAGO 8 BANGKOK 20 N.Y. (New York) 9 H. KONG (Hong Kong) 21 CARACAS 10 T. Lastmanuals provides you a fast and easy access to the user manual CANON MV800. We hope that this CANON MV800 user guide will be useful to you. English English. Digital Video Camcorder. Instruction Manual. Introduction. Basic Functions. Advanced Functions. Editing. Mini. Digital Video Cassette. Additional InformationIntroductionAdvanced Functions Recording. The multi-image screen is recorded on the tape. The camcorder retains the setting even if you turn it off or change the program AE mode. Digital effects cannot be used in the following cases: - When the program selector is set to EASY. About the multi-image screen: The multi-image screen cannot be used in the following cases: - In the Night mode. In PLAY (VCR) mode: Pressing any tape operation button (such as play or pause) cancels the multi-image screen. The camcorder uses the full width of the CCD providing high-resolution 16:9 recording. WIDESCREEN buttonThe multi-image screen cannot be used when the widescreen mode is selected. If you play back a widescreen recording on a normal TV, the image appears horizontally squeezed. Playback. The playback image can be magnified up to 5 times. SET dialTo shrink the image below 2 times magnification, move the zoom lever toward W.

Advanced Functions PlaybackWhen recording near loud sound (such as fireworks, drums or concerts), sound may become distorted or may not be recorded in the actual sound level. This is not a malfunction. Viewfinder picture is blurred. Sound is distorted or recorded in a lower volume than the actual volume. Additional InformationProblem. Pressing the playback button does not start playback. Cause. In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service. Page 2 Important Usage Instructions Introduction WARNING.Change the display language before you begin ( E 65). Symbols and References Used in This Manual Introduction ?: Precautions related to the camcorder operation. ?: Additional topics that complement the basic operating procedures. ?: Reference page number. ? Capital letters are used to refer to buttons on the camcorder. Page 4 Table of contents Introduction Using this Manual.3 Checking Supplied Accessories.6 Components Guide.7 Basic Functions Preparations Preparing the Power Supply. Page 5 Editing Recording to a VCR or Digital Video Device.68 Recording from Analog Video Devices (VCR, TV or Camcorder).70 Recording from Digital Video Devices (DV Dubbing).71 Converting Analog Signals into Digital Signals (Analog-Digital Converter).73 Transferring Video Recordings to a Computer. Page 6 Checking Supplied Accessories CA-570 Compact Power Adapter (incl. Charging the Battery Pack 1. Connect the power cord to the adapter. 2. Plug the power cord into a power outlet. 3. Connect the power adapter to the camcorder’s DC IN terminal. Page 11 Using a Household Power Source Connect to a household power source to use the camcorder without worrying about the battery power. You can keep the battery pack attached; the battery power will not be consumed. E 1.

Turn the POWER switch to OFF. 2. Connect the power cord to the power adapter. 3. Plug the power cord into a power outlet. 4. Connect the power adapter to the camcorder’s DC IN terminal. Basic Functions Preparations. Turn off the camcorder before connecting or disconnecting the power adapter. Page 12 ? Charging, Recording and Playback Times Below times are approximate and vary according to the charging, recording or playback conditions. Battery Pack Charging Time Max. Basic Functions Preparations 3. Page 14 Installing the Backup Battery The backup battery (lithium button battery CR1616) allows the camcorder to retain date, 18) and other camcorder settings while the power source is disconnected. Page 15 Preparing the Camcorder Adjusting the Viewfinder (Dioptric Adjustment) E 1. Turn on the camcorder and keep the LCD panel closed. 2. Pull out the viewfinder. 3. Adjust the dioptric adjustment lever. 4. Push the viewfinder back in. Hook the lens cap on the grip belt while you are recording, and place it over the lens when you have finished. Basic Functions Preparations 1. Attach the cord to the lens cap. 2. Page 16 Attaching the Shoulder Strap Pass the ends through the strap mount and adjust the length of the strap. LCD Backlight Basic Functions Preparations LCD BACKLIGHT button You can switch the brightness of the LCD screen between normal and bright by pressing the LCD BACKLIGHT button. This is useful for outdoor recordings. Page 18 Setting the Time Zone, Date and Time Set the time zone, date and time when you first start using your camcorder, or when you have replaced the backup battery. The time zone setting appears (see table on the next page). Page 19 7. Press the MENU button to close the menu and to start the clock. E 16 1 18 19 20 24 4 2 3 17 6 7 15 9 10 8 5 21 23 14 12 22 11 13 1 2 3 4 5 6 7 8 9 10 11 12 13 No. Time zone No. 1 LONDON 13 Time zone 2 PARIS 14 SAMOA 3 CAIRO 15 HONOLU. (Honolulu) 4 MOSCOW 16 ANCHOR. (Anchorage) 5 DUBAI 17 L.A.

(Los Angeles) 6 KARACHI 18 DENVER 7 DACCA 19 CHICAGO 8 BANGKOK 20 N.Y. (New York) 9 H. Page 20 Displaying Date and Time during Recording You can display the date and time in the lower left corner of the screen. Page 21 Recording Movies on a Tape Recording Before You Begin Recording Make a test recording first to check if the camcorder operates correctly. If necessary, clean the video heads ( 79). E Recording 1. Remove the lens cap. 2. Set the camcorder to CAMERA mode. Set the POWER switch to CAMERA. Page 22 ? About the LCD and viewfinder screen: The screens are produced with extremely high-precision manufacturing techniques, with more than 99.99% of the pixels operating to specification. Less than 0.01% of the pixels may occasionally misfire or appear as black or green dots. This has no effect on the recorded image and does not constitute a malfunction. ? The camcorder will shut off after 5 minutes when left in record pause mode to protect tape and video heads. Page 23 5. Press the MENU button to close the menu. Screen Displays during Recording Remaining battery charge The battery symbol indicates the charge status of the battery pack. Press and release the (record review) button. The camcorder rewinds the tape, plays back the last few seconds, and returns to record pause mode. Page 25 Zooming The camcorder is equipped with optical zoom and digital zoom. E Zoom in Zoom out Zoom lever Basic Functions Recording Optical Zoom 20x optical zoom CAMERA 18x optical zoom PLAY (VCR) Move the zoom lever toward W to zoom out (wideangle). Move it toward T to zoom in (telephoto). Press the zoom lever slightly for a slow zoom. Press harder for a faster zoom. ? Keep at least 1 m (3.3 ft.) to the subject. At wide-angle, you can focus on a subject as close as 1 cm (0.39 in.). Page 26 Digital Zoom When the digital zoom is activated, the camcorder automatically switches between optical and digital zoom. If necessary, support the camcorder with your left hand.

Be careful that your fingers do not touch the microphone or lens. Page 28 Playing Back a Tape Playback If the playback picture is distorted, clean the video heads using a Canon Head Cleaning Cassette or a commercially available digital video head-cleaning cassette ( 79). 1. Set the camcorder to PLAY (VCR) mode. There is no sound during special playback. ? The picture may become distorted during some special playback modes. ? The camcorder stops the tape automatically after 5 minutes in playback pause mode to protect tape and video heads. Basic Functions Playback Plays back the tape at 11.5 times normal speed (forward or reverse). Page 30 Adjusting the Volume When you use the LCD screen for playback, the camcorder plays back the sound via built-in speaker. The speaker does not sound when you close the LCD panel. Turn the SET dial up to increase the volume again. Page 31 Playing Back on a TV Screen TVs with SCART Terminal E Refer also to the TV or VCR instruction manual. Signal flow PC-A10 SCART Adapter Basic Functions Playback STV-250N Stereo Video Cable (supplied) 1. Turn off all devices before starting the connections. 2. Connect the PC-A10 SCART Adapter to the TV or VCR’s SCART terminal. 3. Connect the STV-250N Stereo Video Cable to the camcorder’s AV terminal and the audio terminals on the SCART Adapter. Connect the white plug to the white audio terminal L (left), the red plug to the red audio terminal R (right) and the yellow plug to the yellow video terminal VIDEO. 3. Page 33 Selecting the Audio Output Channel You can select the output channels when playing back a tape with audio recorded on two channels. SET dial MENU button Selecting Menus and Settings 1. Press the MENU button to open the menu. 2. Turn the SET dial to select a submenu and press the SET dial. 3. Turn the SET dial to select a menu item and press the SET dial. 4. Turn the SET dial to select a setting option. 5. Press the MENU button to close the menu.

Page 35 Menu and Default Settings Default settings are shown in boldface. Page 39 Using the Recording Programs Recording Easy Recording Program E The camcorder adjusts focus, exposure and other settings automatically, allowing you to just point and shoot. Program AE Modes Auto The camcorder adjusts focus, exposure and other settings automatically. However, you have the option of adjusting the settings manually. Sports Use this mode to record sports scenes (such as tennis or golf) or moving objects (such as roller coasters). The symbol of the mode appears on the upper left corner of the screen. Advanced Functions Recording. The setting resets to the Auto mode when you change the position of the program selector. ? Do not change the mode during recording as the brightness of the image may change abruptly. Page 42 Using the Night Mode Allows you to record in dark places where lights cannot be used, without sacrificing color. Page 43 Skin Detail Function When shooting close-ups of people, the camcorder automatically softens details to reduce the appearance of skin imperfections for a more complimentary appearance. Page 44 Adjusting the AE Shift You can adjust the AE (auto exposure) function to lighten or darken the image. This allows you to compensate for backlit or overexposed scenes. In such case, focus manually. Reflective surfaces Subjects with low contrast or without vertical lines Fast Moving Subjects Through dirty or wet windows E Night Scenes FOCUS button Zoom lever Program selector SET dial PLAY (VCR) 1. Set the program selector to. Advanced Functions Recording CAMERA 2. Adjust the zoom. When you operate the zoom after adjusting the focus, the subject may not stay in focus. Page 46 Infinity Focus Use this function when you wish to focus on faraway subjects such as mountains or fireworks. Press the FOCUS button more than 2 seconds after step 2 in Adjusting the Focus Manually. “MF ” appears.

When you operate the zoom or turn the SET dial, “ camcorder changes to manual focus. Page 47 Setting the White Balance You can use the preset modes to reproduce colors more accurately, or set a custom white balance to obtain the optimal setting. AUTO SET E Auto white balance Use the custom white balance setting to make white subjects appear white under colored lighting. Use this mode for recording under changing lighting condition, video lights or sodium lamps. Use this mode for recording night scenes, fireworks, sunrise or sunset. The result will still be better than with the auto setting. - Reset the white balance when the lighting condition changes. - Turn off the digital zoom. Page 49 Setting the Shutter Speed You can adjust the shutter speed manually to make stable shots of fast moving subjects. Set the program AE mode to the (Auto) mode. This allows you to record brightly in places with insufficient lighting. However, you can set the camcorder not to use a slow shutter speed. Depending on the nature and usage condition of the tape, picture and sound recorded in LP mode may be distorted. We recommend using the SP mode for important recordings. Page 53 Audio Recording Changing the Audio Mode E You can record sound in two audio modes—16-bit and 12-bit. The 12-bit mode records sound on two channels (stereo 1), leaving 2 channels free (stereo 2) for adding new sound later with another editing device. Select the 16-bit mode for higher sound quality. Page 54 Using Digital Effects Faders ( 56) Begin or end scenes with a fade to or from black. Page 55 Effects ( 56) Add flavor to your recordings. Sound will be recorded normally. Page 56 Selecting a Fader In CAMERA mode, set the program selector to CAMERA. The name of the selected fader flashes. Page 58 Widescreen TV Recording (16:9) The camcorder uses the full width of the CCD providing high-resolution 16:9 recording. The picture on the viewfinder appears horizontally squeezed. ?

The multi-image screen cannot be used when the widescreen mode is selected. ? If you play back a widescreen recording on a normal TV, the image appears horizontally squeezed. Page 59 Magnifying the Image Playback The playback image can be magnified up to 5 times. Page 60 Displaying the Data Code The camcorder maintains a data code containing recording date and time and other camera data such as shutter speed and exposure (f-stop). When you play back a tape, you can display the data code and select the data code combination you wish to display. The data code will not display the next time you turn on the camcorder. Six-Second Auto Date Date and time appear for 6 seconds when you begin playback, or to indicate that date or time zone has changed. Page 63 Playing Back a Tape with Added Sound You can select to play back Stereo 1 (original sound), Stereo 2 (added sound), or adjust the balance of both sounds. STEREO2: Plays back the added sound. Page 65 Changing the Display Language The language used for screen display and menu items can be changed. The available set of languages varies depending on the region. Follow the procedure below to check which set of languages are provided with your camcorder. If you turn off the beep, all camcorder sounds including the ones of the My Camera settings will be turned off. Page 67 Turning Off the Image Stabilizer The image stabilizer compensates for camcorder shake even at full telephoto. It tries to compensate for horizontal movements; therefore, you may decide to turn it off when you mount the camcorder on a tripod. Page 68 Editing Recording to a VCR or Digital Video Device You can copy your recordings by connecting the camcorder to a VCR or a digital video device. If you connect a digital video device, you can copy recordings with virtually no generation loss in image and sound quality. Connecting the Devices Connecting a VCR See Playing Back on a TV Screen ( 31).

Connecting a Digital Video Device Use the optional CV-150F (4 pin-4 pin) or CV-250F (4 pin-6 pin) DV Cable. Page 69 ? When connecting a VCR, the quality of the edited tape will be slightly lower than that of the original. ? When connecting a digital video device: - If the picture does not appear, reconnect the DV cable or turn the camcorder off and back on again. - Proper operation cannot be guaranteed for all digital video devices equipped with a DV terminal. If operation does not work, use the AV terminal. ? We recommend powering the camcorder from a household power source. Page 70 Recording from Analog Video Devices (VCR, TV or Camcorder) You can record videos or TV programs from a VCR or analog camcorder on the tape in the camcorder. CAMERA PLAY (VCR) 1. Connect the camcorder to the analog video device. See Playing Back on a TV Screen ( 31). 2. Set the camcorder to PLAY (VCR) mode and load a blank cassette. 3. Connected device: Load the recorded cassette. 4. Press the REC PAUSE button. In record pause mode and during recording, you can check the picture on the screen. 5. Page 71 Recording from Digital Video Devices (DV Dubbing) You can record from other digital video devices equipped with a DV terminal with virtually no loss in picture and sound quality. CAMERA E PLAY (VCR) 1. Connect the camcorder to the digital video device. See Connecting a Digital Video Device ( 68). 2. Set the camcorder to PLAY (VCR) mode and load a blank cassette. Page 72 Concerning Copyright Copyright Precaution Certain pre-recorded video tapes, films and other materials, as well as some television programmes are copyrighted. Unauthorised recording of these materials may violate copyright protection laws. Copyright Signals During playback: If you try to play back a tape that contains copyright control signals for protection of software, “COPYRIGHT PROTECTED PLAYBACK IS RESTRICTED” appears for a few seconds and the camcorder displays a blank blue screen.

The DV terminal serves as output terminal only. E Connecting the Devices Turn off all devices before starting the connections. Unload the tape from the camcorder. Refer also to the instruction manual of the connected device. Page 75 Transferring Video Recordings to a Computer E Transferring Using a DV Cable You can transfer recordings to a computer equipped with a IEEE1394 (DV) terminal or IEEE1394 capture board. Refer to the instruction manual of the software. Page 76 Additional Information Screen Displays Hiding the Displays on the LCD Screen You can hide the displays on the LCD screen to have a clear screen for playback. This message appears each time you turn the power on until you set the time zone, date and time. 18 CHANGE THE BATTERY PACK Battery pack is exhausted. Replace or charge the battery pack. 10 THE TAPE IS SET FOR Cassette is protected. Replace the cassette or change the ERASURE PREVENTION position of the protect switch. Do not carry the camcorder by the LCD panel or viewfinder. ? Do not leave the camcorder in places subject to high temperatures, such as a sunheated car, and high humidity. ? Do not use the camcorder near strong electric or magnetic fields such as above TVs, near plasma TVs or mobile phones. ? Do not point the lens or viewfinder at strong light sources. Do not leave the camcorder pointed at a bright subject. Page 80 ? To maintain the best picture quality, we recommend cleaning the video heads frequently with the Canon DVM-CL Digital Video Head Cleaning Cassette or a commercially available dry cleaning cassette. ? Tapes already recorded with dirty video heads may not be played back correctly even when you clean the video heads. ? Do not use wet type cleaning cassettes as this may damage the camcorder. Page 81 Battery Pack Handling Precautions DANGER. E ? Charged battery packs continue to discharge naturally. Therefore, charge them on the day of use, or the day before, to ensure a full charge.

Consult the Canon Service Center for information on plug adapters for overseas use. E Playback on a TV Screen You can only play back your recordings on TVs with PAL system. Page 84 Troubleshooting If you have a problem with your camcorder, refer to this checklist. Consult your dealer or a Canon Service Center if the problem persists. Power Source Problem Camcorder will not turn on. Cause Solution Battery pack is exhausted. Replace or charge the battery pack. 10 Battery pack is not correctly attached. Attach the battery pack correctly. 10 Battery pack is exhausted. Replace or charge the battery pack. 10 Power save function has been activated. Turn on the camcorder. Page 85 Recording Problem Cause Solution Image will not appear on the screen. Camcorder is not set to CAMERA mode. Set the camcorder to CAMERA mode. 21 “SET THE TIME ZONE, DATE AND TIME” appears on the screen. Time zone, date and time are not set. Set the time zone, date and time. 18 Backup battery is exhausted. Replace the backup battery and reset the time zone, date and time. 14 Battery pack is inserted the wrong way. Page 86 Playback Problem Cause Pressing the playback button does not start playback. Camcorder is turned off, or is not set to PLAY (VCR) mode. Solution Set the camcorder to PLAY (VCR) mode. 28 Cassette is not loaded. Load a cassette. 13 Tape reached the end (“ END” flashes on the screen). This product is designed to achieve excellent performance when used with genuine Canon accessories. E WD-28 Wide-converter This lens decreases focal length by a factor of 0.7, giving you a wide perspective for indoor shots or panoramic views. CCI Service Centre, Unit 130 Centennial Park, Borehamwood, Hertfordshire, WD6 3SE, England Telephone 0870-241-2161 Canon Australia Pty. Ltd. Info-Line: 131383 www.canon.com.au Canon New Zealand Ltd. Customer Care: (09) 489 0470 www.canon.co.nz Canon Singapore Pte.

A driver is preinstalled on Windows operating systems later than Windows 98 Second Edition and Mac operating systems later than Mac OS 9, and will be installe d automatically. If the problem persists, disconnect the interface cable, turn off camcorder and computer, turn camcorder and computer back on and reconnect them. ? We recommend powering the camcorder from a household power source while it is connected to the computer. ? Refer also to the instruction manual of the computer. ? Users of Windows XP can download the DV Messenger software from below homepage. With DV Messenger, you can perform a videoconference using your camcorder. Post your question here in this forum. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share. Note that email addresses and full names are not considered private information. Please mention this; Therefore, avoid filling in personal details. Please enter your email address.